Trình điều khiển ánh sáng dải LED 12v 250w vỏ nhôm IP67

Sales

100% kiểm tra ghi đầy tảiTrình điều khiển dẫn 250w, smạch hort, quá tải, bảo vệ quá nhiệt, sthích hợp choBL ĐÈN ĐỔI MỚInhững dải ánh sáng.

Chi tiết sản phẩm

12v 250w dual output cable 12v led strip light driver , meet with ETL/cETL, CE Mark (EMC ,LVD) for North American, European markets, a perfect situation for Start Lighting outdoor constant voltage bar lghts.

Specification

MODEL		SMT-012-250VW	SMT-024-250VW
OUTPUT	DC VOLTAGE	DC12V	DC24V
	RATED CURRENT	20.83A	10.42A
	CURRENT RANGE	0-20.83A	0-10.42A
	RATED POWER	250 W	250W
	RIPPLE&NOISE(max)	150mV	150mV
	CURRENT TOLERANCE
	SETUP RISE TIME	80ms/120VAC,220VAC
	HOLD UP TIME(Typ.)	60ms/120VAC,220VAC
INPUT	VOLTAGE RANGE	100~265VAC
	FREQUENCY RANGE	50~60Hz
	POWER FACTOR(Typ.)	>PF0.97@120VAC & 220VAC
	EFFICIENCY(Typ.)	﹥89%
	AC CURRENT(Typ.)	1.85A/120VAC,220VAC
	INRUSH CURRENT (Typ.)	COLD START 50A/120VAC,220VAC
PROTECTION	Short circuit	Protection type:recovers automatically after condition is removed
	Overload	overload protected@145-160% above peak rating
	Over temperature	Protection type:Shut down o/p voltage,re-power on to removed
ENVIRONMENT	WORKING TEMP.	-40~+50℃ (Refer to output load derating curve)
	WORKING HUMIDITY	20~99% RH non-condensing(Waterproof)
	STORAGE TEMP.,HUMIDITY	-40~+80℃,10~99%RH
SAFETY&EMC	SAFETY STANDARDS	ETL/cETL,CE Mark(EMC ,LVD),IP67
	WITHSTAND VOLTAGE	I/P-O/P:1.5KVAC IP-GND:1.5KVAC
	EMC Test Standards	EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006
		EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006
NOTE	1.All parameters NOT specially mentoned are measured at 120~220VAC input,rated load and 25℃ of ambient temperature.
	2.Ripple&noise are measured at 20MHz of bandwidth by using a 12