Specification of slim power supply 12v 48w
SPECIFICAION MODEL SMT-012-048VW SMT-024-048VW OUTPUT DC VOLTAGE 12V 24V RATED CURRENT 4.0A 2.0A CURRENT RANGE 0~4.0A 0~2.0A RATED POWER 48W 48W RIPPLE&NOISE(max) 120mVp-p 200mVp-p voltage TOLERANCE 12V±5% 24V±5% SETUP RISE TIME 60ms/110VAC 60ms/110VAC HOLD UP TIME(Typ.) 20ms/230VAC 10ms/110VAC INPUT VOLTAGE RANGE 100~265Vac 100~265Vac FREQUENCY RANGE 50~60Hz 50~60Hz POWER FACTOR(Typ.) EFFICIENCY(Typ.) ﹥83% ﹥84% AC CURRENT(Typ.) 0.45A/110V, 0.25A/220V 0.45A/110V,0.25A/220V INRUSH CURRENT (Typ.) COLD START 30A/110~220VAC PROTECTION Short circuit Protection type:recovers automatically after condition is removed Overload overload protected@110%~150% above peak rating Over temperature Protection type:Shut down o/p voltage,re-power on to removed ENVIRONMENT WORKING TEMP. -25~+50℃ (Refer to output load derating curve) WORKING HUMIDITY 20~90% RH non condensing, refer to IP67 Vibration 10~500Hz,2G 10min/1cycle,period for 60min,each along X,Y,Z axes STORAGE TEMP.,HUMIDITY -40~+80℃,10~99%RH SAFETY&EMC SAFETY STANDARDS IP67 approved; Design refer to LVD EN61347-2-13:2005,EN61347-1:2008 WITHSTAND VOLTAGE I/P-O/P:3KVAC, I/P-COVER: 3KVAC , O/P-COVER:500VAC EMC Test Standards EN55015:2006/A2:2009,EN61000-3-2:2006/A2:2009,EN61000-3-3:20 MTBF 50KHours (25℃) NOTE 1.All parameters NOT specially mentoned are measured at 110VAC, 220VAC input,rated load and 25℃ of ambient temperature. 2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 [1mTên sản phẩm: AC sang DC
Nguồn điện LED điện áp không đổi V 48W
0 ~ 2.0A
THIẾT LẬP THỜI GIAN TĂNG
20ms / 230VAC
DÒNG ĐIỆN ÁP
100 ~ 265Vac
0,45A / 110V, 0,25A / 220V
0,45A / 110V, 0,25A / 220V
INRUSH HIỆN TẠI (Loại)