Waterproof 100 watt led power supply non dimmable led driver
96W waterpoof non dimmable led driver in 12vdc, ETL ,CE, ROHS approval, aluminum case design, universal 100-265vac input, work with STEP 1 DEZIGNS LED 3mm wide Mini High Output Tape Lights 100w.
Specification
MODEL | SMT-012-096VW | SMT-024-096VW | |
OUTPUT | DC VOLTAGE | 12V | 24V |
RATED CURRENT | 8.33A | 4A | |
CURRENT RANGE | 0~8A | 0~4A | |
RATED POWER | 96W | 96W | |
RIPPLE&NOISE(max) | 150mV | 150mV | |
VOLTAGE TOLERANCE | ±0.5V | ±0.5V | |
SETUP RISE TIME | 80ms/110V,220VAC | ||
HOLD UP TIME(Typ.) | 60ms/110V,220VAC | ||
INPUT | VOLTAGE RANGE | 100~265VAC | |
FREQUENCY RANGE | 50~60Hz | ||
POWER FACTOR(Typ.) | 0.95 | ||
EFFICIENCY(Typ.) | ﹥87% | ||
AC CURRENT(Typ.) | 0.92A/110VAC, 0.86A/220VAC | ||
INRUSH CURRENT (Typ.) | COLD START 50A/110VAC, 220VAC | ||
PROTECTION | Short circuit | Protection type:recovers automatically after condition is removed | |
Overload | overload protected@145-160% above peak rating | ||
Over temperature | Protection type:Shut down o/p voltage,re-power on to removed | ||
ENVIRONMENT | WORKING TEMP. | -30~+50℃ (Refer to output load derating curve) | |
WORKING HUMIDITY | 20~99% RH non-condensing(Waterproof IP67) | ||
STORAGE TEMP.,HUMIDITY | -40~+80℃,10~99%RH | ||
SAFETY&EMC | SAFETY STANDARDS | CE ETL Mark(LVD) | |
WITHSTAND VOLTAGE | I/P-O/P:1.5KVAC IP-GND:1.5KVAC | ||
EMC Test Standards | EN55015:2006;EN61547:1995+2000;EN61000-3-2:2006 | ||
EN61000-3-3:1995+A2:2005;EN61346-1:2001;EN61347-2-13:2006 | |||
NOTE | 1.All parameters NOT specially mentoned are measured at 110VAC,220VAC input,rated load and 25℃ of ambient temperature. | ||
2.Ripple&noise are measured at 20MHz of bandwidth by using a 12 | |||
[1mBộ nguồn dẫn 100 watt chống nước
96W waterpooftrình điều khiển dẫn không thể điều chỉnh độ sáng
trong 12vdc, ETL, CE, phê duyệt ROHS, thiết kế vỏ nhôm, đầu vào 100-265vac phổ quát, làm việc với BƯỚC 1 DEZIGNS
Đèn LED băng đầu ra nhỏ rộng 3mm100w.Sự chỉ rõ MÔ HÌNH SMT-012-096VW SMT-024-096VW ĐẦU RA ĐIỆN ÁP DC