Cảm biến vi sóng được UL FCC phê duyệt 347 ~ 480 VAC cho UFO High Bay / Tri Proof Light
Bảo hành 2 năm1746-IM16 Mô-đun đầu vào Allen-Bradley AC SLC 500 series.
Vòng thông minh RFID được tích hợp trong chip MCU NXP kép, để mô phỏng và sao chép các tần số khác nhau của IC không tiếp xúc, chip ID, có thể được sử dụng thay cho thẻ rfid và chìa khóa thông minh rfid.
Dây buộc cáp UHF RFID này thường được làm bằng nylon, phần đầu của dây buộc có thể tùy chỉnh theo chức năng và bên trong có chip IC. Có thể điều chỉnh độ dài cổ tay, không thể mở một lần mà không cần cắt bỏ. là Alien Higgs-3 hoặc Impinj Monza R6P, vì vậy thẻ này có khoảng cách đọc dài, hoàn toàn phù hợp để quản lý kho hàng lớn.
Thẻ Ntag213 có thể in hình ảnh theo ý muốn cũng như sử dụng trực tiếp mà không cần in. Thẻ RFID Ntag213 thường được sử dụng để làm thẻ thanh toán, thẻ thành viên, thẻ xe buýt, thẻ đỗ xe, thẻ kiểm soát ra vào, bán vé, v.v. Thẻ NFC Ntag213 là thẻ NFC đầy đủ tính năng với dung lượng bộ nhớ nhỏ, có thể đọc và ghi 10.000 lần, tương thích và có thể lập trình với tất cả điện thoại thông minh và thiết bị hỗ trợ NFC.
AC sang DCTrình điều khiển LED điện áp không đổi 24V 15W
0 ổ mờ 10vr12v 180w với CE ETL FCC ROHS đã được phê duyệt, tương thích với bộ điều chỉnh độ sáng 0-10v. tỷ lệ chống thấm nước ip67 có thể phù hợp với dự án 2 foot trong nhà và ngoài trời của E-conolight LED Linear Strip.
KT-8900D là phiên bản nâng cấp của KT-8900.Màn hình màu nhỏ, chế độ chờ 4 băng tần kép, loa ngoài / Ptt. Thích hợp cho các tình huống khác nhau.Kích thước nhỏ, thiết kế đơn giản, chất lượng tuyệt vời và dải tần đầy đủ VHF 136-174MHz và UHF 400-480MHz cho phép bạn tận hưởng mọi tiện ích và nhanh chóng.
KAN0642F là công tắc xúc giác loại không thấm nước, xếp hạng IP67, được sử dụng rộng rãi trong các thiết bị gia dụng.
Các trạm phát điện di động của chúng tôi giữ cho các dụng cụ điện, điện thoại và các thiết bị điện tử khác của bạn luôn được sạc và hoạt động trơn tru. Những thiết bị dự phòng điện đa năng, có kích thước bằng hộp cơm trưa này có thể mang theo bạn trong các chuyến đi cắm trại, đến công trường xây dựng hoặc bất cứ nơi nào khác mà bạn cần điện từ lưới điện.
BACHMANN FM211 bán trực tuyếnGửi thư điện tử cho tôi:sales6@askplc.com
Cần có dây vá điều hòa chế độ khi bộ định tuyến và bộ chuyển mạch Gigabit 1000BASE-LX được lắp đặt vào các nhà máy cáp đa chế độ hiện có. Chúng được sử dụng để điều chỉnh đầu ra singlemode của bộ thu phát Gigabit Ethernet (1000BASE-LX) với mạng cáp đa mode. Tất cả các dây vá điều chỉnh chế độ của SZOPT đều hoàn toàn tuân thủ các tiêu chuẩn ứng dụng IEEE 802.3z.
Thẻ này được trang bị chip impinj R6-p tần số cực cao, được làm bằng vật liệu PET. Với kích thước nhỏ 48 * 4 * 1mm, thẻ có tính năng linh hoạt, in ấn tuyệt vời, hiệu suất chống nước mạnh mẽ, v.v. In và mã hóa tùy chỉnh là tùy chọn. Nó có tác dụng đọc tốt trên các sản phẩm kim loại và chai chứa đầy chất lỏng, chủ yếu được sử dụng trong quản lý tài sản, quản lý thiết bị quy mô lớn, quản lý mỹ phẩm, v.v.
Khách hàng có thể in Thẻ RFID Mifare Desfire Rfid bằng nhựa 13,56 MHz bằng cách sử dụng in offset và nhựa PVC hoàn toàn mới 100% (có sẵn PET, PETG, ABS) với dữ liệu mã hóa, bóng nhiều lớp, kích thước và hình dạng khác nhau, hàng thủ công được tùy chỉnh , thiết kế miễn phí và mẫu miễn phí có sẵn.
Công tắc bật tắt dòng này có chức năng chuyển đổi, chiều cao bộ truyền động, kiểu đầu cuối, vật liệu tiếp xúc, v.v.
Đây là loại Bộ chia PLC hộp ABS có sẵn với 1X4/1X8/1X16/1X32/1X64/1X128, 2X4 /2X8/2X16/2X32/2X64/2X128, các đầu cuối có thể là sc/lc/fc/st trong 3.0mm hoặc Cáp 2.0mm, chiều dài cáp thường là 1-1,5m. Bước sóng có sẵn là: 1260-1650nm.